Big machines have big blind spots, and a stationary loading point like a grain bin auger can be hard to see from the cab. The ReadyVision Heavy-Duty WiFi Camera is an equipment blind spot camera that streams to your iOS or Android phone or tablet, with no monitor to wire in. It is built for backup and blind spot monitoring on heavy equipment and for long-term stationary jobs like loading and unloading at grain bins and storage facilities.
What the ReadyVision Heavy-Duty camera does
The camera creates its own internal Wi-Fi network. You connect with the ReadyVision app on an iPhone, iPad, Android phone or tablet, and the device becomes your screen. No dedicated external monitor or internet service is required. The wireless digital system is rated for a 100 ft. range, and the app is responsive and easy to use.
Key features of this equipment blind spot camera
- 100 ft. digital wireless range to your phone or tablet.
- 150 degree viewing angle to reduce blind spots.
- Night vision: eighteen infrared LEDs give 30 ft. of vision with no ambient light.
- IP68 waterproof and shockproof: dust-tight and able to withstand submersion up to 1.5 meters (5 feet) for 30 minutes.
- 12V constant power through a 12V plug, with an AC/DC adapter included with each camera.
- Magnet base and universal mount: the magnet base included with every camera attaches to any metallic surface, and the universal mount lets you mount it permanently.
- Multiple users: up to two people can watch the same camera at the same time.
Uses on the farm and job site
Because it runs on 12V and has an AC/DC adapter, the Heavy-Duty WiFi camera works both on machines and at fixed locations:
- Grain bins and augers: set the camera on the loading point and let each truck driver watch from the cab. With two viewers allowed at once, a driver and an operator can see the same view.
- Harvest loading: monitor loading and unloading at harvesters throughout the day or night.
- Tractors, loaders and skid steers: use the magnet base on a steel panel for a rear or side view, then move it to another machine as needed.
- Storage facilities and shops: watch a loading dock or door where drivers back in.
Mounting and setup tips
For temporary use, the magnet base attaches instantly to any metal surface. For a camera you leave in one place, switch to the universal mount. As general advice, clean the mounting surface first, aim the camera slightly down so the view includes the area right behind the machine, and keep the lens clear of mud and dust. If you need the antenna farther from the camera, the ReadyVision 30 ft. Antenna Extension is made for this camera. For a steady screen in the cab, add the ReadyVision Cup Holder Phone/Tablet Mount.
Wireless vs. wired equipment cameras
If you prefer a dedicated monitor, the wired Visionworks 5" Skid Steer Special Heavy Duty Monitor Kit has three camera inputs and a protective U-bracket. For RV owners, the ReadyVision RV WiFi Camera Kit packages this same camera with RV brackets and an antenna. Browse all options in our backup cameras collection or the ReadyVision cameras collection.
Frequently asked questions
How many people can watch the camera at once?
Multiple users can watch the same camera, with a maximum of two at the same time.
Can I move this equipment blind spot camera between machines?
Yes. The magnet base included with every camera attaches to any metallic surface and makes it easy to move. A universal mount is also included for permanent mounting.
Does it work at night?
Yes. Eighteen infrared LEDs provide 30 ft. of vision in the darkest settings with no ambient light.
Clear up the blind spots on your equipment and at the bin. Order the ReadyVision Heavy-Duty WiFi Camera today. Questions? Contact us.