If you already own a tractor with a loader, a Smucker 10 ft front bucket weed wiper is a simple way to put that loader to work on weed control. This pump-fed tractor weed wiper mounts to the front bucket with the included brackets, so you can wipe herbicide onto weeds that stand taller than your pasture grass, crop or food plot without broadcast spraying the whole field.
What is a front bucket weed wiper?
A weed wiper (sometimes called a wick applicator) carries herbicide to sponges mounted on a tool bar. Instead of spraying a mist over everything, the wetted sponges brush against whatever is tall enough to reach them. Set the bar height just above your desirable plants and only the taller weeds get contact. That is why landowners use wipers for weeds that tower over grass, clover or a crop.
The 10 ft front bucket model (Part # WWTCFB10) is part of Smucker's Top Crop line. It is pump fed, which means herbicide is pushed from your tank through a manifold to each sponge assembly instead of relying on gravity alone.
Key features of the Smucker 10 ft front bucket wiper
- 10 ft working width built from a 5' front bucket tool bar, a 5' tool bar extension and an extension insert bar.
- Four 30" sponge assemblies fed by a 4-port manifold for the 10' Top Crop.
- Two front bucket mounting brackets plus a front bucket mounting bracket tab for attaching to your loader bucket.
- 30 ft of black 1/4" solid tubing, hose clamps, five T riser assemblies, nylon ties and the bolts, nuts and washers needed for assembly.
- Wing pins (RC pins) and a user's manual.
Pump requirements: sprayer not included
This is the most important thing to know before you order: a sprayer or pump is not included with this kit. Smucker recommends a pump of at least 1.8 GPM or larger for the 10 ft front bucket wiper. Plan on supplying your own tank and pump, then plumbing it to the manifold with the included tubing. If you already run a small sprayer on your tractor, check its flow rating against that 1.8 GPM minimum.
Setting up the wiper on your tractor loader
Installation is straightforward. Bolt the two front bucket mounting brackets to your bucket, attach the tool bar sections, then hang the sponge assemblies and run tubing from the manifold to each one. Read the included user's manual before you start, and keep these tips in mind:
- Use the loader to set wiper height. Raise the bar so the sponges sit above your good grass or crop but low enough to hit the weed heads.
- Prime the sponges before the first pass so they are evenly wet.
- Drive at a steady pace. Many operators make a second pass in the opposite direction so both sides of the weeds get contact.
- Always follow the herbicide label for mixing and application, including any label directions for wiper or wick use.
Who the 10 ft front bucket wiper is for
This model fits owners who want to treat pastures, hay ground, food plots or crop rows with a tractor they already have. Compared with our ATV and UTV wipers, the front bucket version uses the loader's lift for height control, which is handy on uneven ground. If you need more width, compare the 15 ft front bucket weed wiper and the 20 ft front bucket weed wiper. If you would rather run a smaller machine, the 10 ft UTV-mount wiper offers the same width on a side-by-side bumper.
You can see every tractor model in our front bucket tractor wiper collection, or browse all sizes and mounts in our weed wipers collection. When you are ready, the full parts list is on the 10 ft front bucket wiper product page.
Frequently asked questions
Does the Smucker 10 ft front bucket weed wiper come with a pump?
No. The description states a sprayer is not included with this kit. Smucker recommends using a pump rated at a minimum of 1.8 GPM or larger.
How does it attach to my tractor?
It mounts to your front bucket using the two included front bucket mounting brackets and a mounting bracket tab, with the 5' tool bar and 5' extension making up the 10 ft width.
How many sponges does the 10 ft tractor wiper use?
The kit includes four 30" sponge assemblies fed by a 4-port manifold.
Ready to put your loader to work on tall weeds? Order the Smucker 10 ft front bucket weed wiper and pair it with a pump of 1.8 GPM or more. You can find more how-to articles on our blog. Questions? Contact us.